OmniCenter 12.1.11 Release Notes

Release Date: Feb. 27, 2020

OmniCenter maintenance release 12.1.11 is now available with the following changes:

Bug Fixes

• Bandwidth Graph not Rolling up Data prefixes correctly
• Inventory Report CSV Not Showing Serial Number When It Exists
• Delay in Maintenance Windows execution
• Newly added device using the Other (Interface Only) Device type not showing latency metrics in UI
• Bandwidth table in histogram on Cisco Router and Nexus showing incorrect usage
• Advanced report email attached with empty PDF
• Add new FQDN for Netreo URL in alerts field in High Availability Configuration
• Windows Services list not populating
• 1 Minute Polling isn't being automatically applied to interfaces
• One Minute polling stats not visible in histograms
• Certain F5 Metrics Not Polling After 12.0 Upgrade
• SCOM Polling currently controlled by CRONJOB
• Incidents not getting creates for devices that are polled via RSE
• Custom Report with "Configured Alerts" is not getting loaded properly.
• Category Admin: Template list is not in order
• Deleted User Profile's name is getting appended in User Partition Administration page heading.
• Custom Dashboards Not Saving When Using "%" in Widget
• Add new device process from candidate ip failed to get V3 credential from device templates
• NOC view Not displaying Active Incidents
• Legacy Config Push: After scheduling, the link to go back throws a 404 error
• Rediscovery Schedule page shows incorrect banner color.
• User Partition is not removed from user when user is promoted to SAdmin using Active Directory
• Problem adding extra contact for an incident created by a service check
• For any table records per page is showing empty by default.
• Schedule report is using an incorrect report_id to generate the pdf
• Internal server error - when try to get QR code in mobile app login page
• Qos tab showing duplicate data for Inbound and Outbound
• User Request back port - Ability to set Passive check status to OK on Slave UI
• Auto Disabled devices get re-enabled by vmware
• System Diag: OmniCenter Process Status not being shown on Slave
• Legacy Configuration Push Not Working
• Top Talker Report for Disk Utilization Failing
• User Request back port - Partners bug: Issue with ACK/DEACK when using the Slave UIVM Host Device Dashboard Not displaying Busiest Guest CPU and Memory
• SCOM Polling currently controlled by CRONJOB
• Sending emailed reports from Slave when using email now option doesn't work
• OC Update completion message says both that it was successful and that it failed
• Inventory Report Not listing All Devices
• Interface Threshold Entry broken
• BW Speeds are not reflected in the Bandwidth Analysis Reports correctly
• Bandwidth Graph not Rolling up Data prefixes correctly
• Restarting a Process Deletes the Historical Per process data for the process.
• Attempting to create a low threshold using the unit prefixes does not work
• Inventory Report CSV Not Showing Serial Number When It Exists
• Host check not going critical, but PING does - SE related
• Custom Report with "Configured Alerts" is not getting loaded properly.
• Category Admin: Template list is not in order
• Delay in Maintenance Windows execution
• Devices when detected by the Subnet Scan process fail to get filtered
• Newly added device using the Other (Interface Only) Device type not showing latency metrics in UI
• Bandwidth table in histogram on Cisco Router and Nexus showing incorrect usage
• Deleted User Profile's name is getting appended in User Partition Administration page heading.
• Add new FQDN for Netreo URL in alerts field in High Availability Configuration
• Custom Dashboards Not Saving When Using "%" in Widget
• Unable to enable/disable enable auto authentication flag in the device template
• Add new device process from candidate ip failed to get V3 credential from device templates
• OmniCenter Not Detecting Exporting Interfaces
• Expect script not working for a particular device on Citizens
• NOC view Not displaying Active Incidents
• Legacy Config Push: After scheduling, the link to go back throws a 404 error
• RSE Performance Metrics Disappearing
• No Alarm Created When an RSE Fails to Poll
• Windows Services list not populating
• Rediscovery Schedule page shows incorrect banner color.
• User Partition is not removed from user when user is promoted to SAdmin using Active Directory
• Add device- Manual: Not getting error message for Name field validation.
• Using multiple SNMP methods in an action of a notification group cause the notification report to show duplicate traps being sent when they werent.
• Problem adding extra contact for an incident created by a service check
• For any table records per page is showing empty by default.
• When trying to filter the interface flow histogram to less than 15 min time frame it results in an internal error
• Internal server error - when try to get QR code in mobile app login page
• Qos tab showing duplicate data for Inbound and Outbound
• User able to add Multiple template with same name.
• Cloud- Custom General dashboard widget Business WF histogram is not showing data for the ALL Business WF
• Error when adding a note via the New Device Note api, when the note has a single quote
• Reports failed when using custom time frames with International time flag on
• Few reports still showing wrong time format with international format
• Remove the hardcoded "u_active" column from servicenow API
• gaps in sflows
• Servicenow location not being added to candidate_ip table during discovery

Customers are able to update their systems by navigating to Administration → System → Updates, or by request to Netreo Support. Please contact Netreo Support if you would like your OmniCenter server updated or if you have any questions about this release.